I am joining in with the Stampin’ Dreams Blog Hop this month and we are sharing Favourite Techniques. I always love to try different techniques. Before we start you might be starting here or you have just come from Jenny Hall’s Blog -> HERE.
As for my Favourite Technique. That’s a hard one to choose one. What I am sharing though today is a technique that I have wanted to try for a very long time so it was a good chance to play with it to create some, hopefully fun cards with you.
The technique I am sharing with you is the Salt Background Technique. Have you tried this before?
Using the salt on a wet background creates a type of “bleaching” of dots on your card as the card dries. I will show you the cards and then show you how to create your own. (You might want to continue to Blog Hop and stop by again later to take in all the details).
HOW TO CREATE YOUR OWN SALT BACKGROUND
For this technique you can use any type of salt but the result will differ. The larger Rock Salt will result in larger “bleached” patterns (like the first example above) whereas the regular fine Table Salt will give a speckled type of “bleached” pattern, (like the 2nd example).
As you need to add water to your card you will need a good quality card to take the water. Either the Stampin’ Up! Watercolour Paper or the Shimmer Paper works very well.
NB: The steps below are for the first card sample above.
1. Wash over your card with the Aquapainter and water. Add drops of chosen reinker colour(s) over your card.
For this sample below I added drops of Pumpkin Pie Reinker first over different areas on the card.
I added other colours too. Daffodil Delight and Bermuda Bay.
2. Using the Aquapainter wash over the colours to spread it over the card. Try not to mix the colours too much though. It does look a bit messy. The colours lighten as they dry too. Each time you do it, it will work out different. You can just use one colour reinker too as I did in the Night of Navy card.
While the card is still wet sprinkle over your salt. I forgot to take a photo of this sample with the salt on it but I will show a different card below.
3. Allow the card to dry. You could use the Heat Tool but I found it just spread the colours more which I didn’t want so leave the card for several hours or even overnight.
Once it is dried lightly brush off the salt. You will see little “bleached” spots where the salt was. It is a great effect and you can use that directly on your cards.
Here is a different sample in Rich Razzleberry showing the salt over the card. I will share the finished card for this one at a later time. For these cards I used the Rock Salt which are larger grains of salt.
For this Night Of Navy one below I used the finer Table Salt. Which I didn’t take a photo of at the time. I did add a lot more salt to the card too. I like this effect how it turned out.
I will say my hands were very inky by the time I finished with all the different colours. But that’s part of the fun. 🙂
Thanks for stopping by. Now you are off on the next blog and can see what technique they have to share with you today.
Click on the ‘NEXT’ image below to head to Narelle’s Blog.
Jenny
